Fine Adjustment - Toshiba B-850 Owner's Manual

APPENDIX 4 SYSTEM MODE
A4.4 Printer Parameter

Fine Adjustment

(Cont.)
NOTES:
When pressing the [FEED]
and [RESTART] keys at the
same time in the parameter
setting, the message returns
to "<3>ADJUST SET".
If holding the [FEED] or
[RESTART] key for 0.5
seconds or longer in the
Printer Parameter Fine
Adjustment, the key is
entered continuously.
A changed parameter
becomes enabled by pressing
the [PAUSE] key and is
stored in memory until the
printer is turned off.
Use the [FEED] or
[RESTART] key to select a
desired value or option.
Feed Length Fine Adjustment
(Example)
NOTE:
The fine adjustment value
equals the sum of the fine
adjustment values set by the PC
command and this parameter.
The maximum feed length fine
adjustment value is ±50.0mm.
When the value reaches the
maximum, the value remains
unchanged even if the
subsequent fine adjustment is
performed.
While pressing the [FEED] and [PAUSE] keys at the same time, turn
on the printer. Holder both keys until the "<1>DIAG. Vx.x" Message
appears.
Press the [FEED] key.
The printer is at the start of the Printer Parameter Fine Adjustment
menu.
Feed Length Fine Adjustment
With this parameter you can fine adjust the feed length.
"<3>ADJUST SET" appears, press the [PAUSE] key.
[RESTART]
[FEED]
[FEED] key: Pressing the [FEED] key one time causes a –0.5mm
change, up to –50.0 mm.
[RESTART] key: Pressing the [RESTART] key one time causes a
+0.5mm change, up to +50.0 mm.
After completing the fine adjustment, press the [PAUSE] key.
A4- 6
EO1-33029
A4.4 Printer Parameter Fine Adjustment
When