Single phase - .6/.8/1.0/1.2 kva; single phase - .6/.8/1.0 kva plus (32 pages)
Summary of Contents for Toshiba Power Supply
Page 1
UNINTERRUPTIBLE POWER SYSTEMS Isolated-Redundant UPS Systems ß Mix and Match Modular kVA Sizes ß Mix and Match New and Existing Modules ß Modules Can be in Separate Rooms ß Simple Maintenance Scheme without Transfers to Utility Power ß Sequential Installation and Startup ß...
Page 2
A key requirement of this system is that the standby UPS system must accept a 100% step load with minimal transient voltage. Toshiba’s design can handle 100% step load without using the batteries and maintaining a less than 5% voltage distortion, making this UPS configuration the right choice for many customers.