Network Configuration For Windows 2000 - Toshiba P000233790 Owner's Manual

Network Configuration for Windows 2000:

The following is an example of how to configure the Windows 2000 TCP/IP network settings:
Step 1: At the Windows 2000 Desktop, click
"Start", then select "Settings", and click on
the "Control Panel" as shown in the screen
below.
Step 2: At the Control Panel window, select
and double click on the "Network and
Dial-up Connections" icon.
Step 3: In the Network and Dial-up
Connections panel window, select and right
click on the "Local Area Connections" icon,
then select and click on the "Properties"
menu item.
Step 4: In the Local Area Connection
Properties panel, select the "Internet
Protocol (TCP/IP)"item and then click on the
"Properties" button.
Step 5: In the Internet Protocol (TCP/IP)
Properties panel, select "Obtain an IP
address automatically". Close each panel
by pressing the "OK" button.
Step 6: You should now be able to access the
PCX5000 configuration pages. Launch your
browser and open location:
http://192.168.100.1. Proceed now to the
"Configuring the PCX5000 Gateway"
section of this manual,
8