Maintenance - Panasonic F-YWP33N Operating Instructions Manual

Maintenance

Empty the water
tank before doing
any maintenance
Please disconnect the power plug and empty the
tank. (see P.14 for how to empty the tank)
Water tank: Once per month
Wash water tank and tank cover with clean water 2-3 times.
You don't need to remove the float, just clean it with water.
Tank handle Water outlet
Float
Pore
Shaft
Remove sticky dirt with thinned
neutral detergent
Inner wall of tank may get black
(due to dirt in air which dissolved
in water)
16
work!
To remove the tank cover
Turn water tank handle up
Open the water outlet
Pull water tank cover
Tank
upward
cover
Do not strongly pull on
the water outlet.
Float
Clean dirt around shaft
with water (to prevent
float from malfunctions)
Do not remove float
(invalid installation of it
may lead to operation
failure and water leak)
→ Insert both axis in
hole as illustrated in
figure to the left when
float falls off.
Cleaning agents such as those shown at under should
not be used.
If using a chemically-treated cloth, be sure to read
the instructions of the cloth.
Water outlet
(turn tank handle
upward before removing
or replacing it)
Tank handle
Water tank
Tank cover
Tank removal bar