How To Drain Continuously - Panasonic F-YWP33N Operating Instructions Manual

How to drain continuously

You may connect a hose to this product for continuous drainage if applicable
(call your service center or dealer for continuous drainage installation or removal)
Secure drainage hose
firmly.
Keep drainage hose from
bending and elevation
difference for good drainage.
Poor drainage may lead to
water leak and wet floor.
Required accessories
Commercially available
plastic water hose
Length: 30cm longer than
distance from
dehumidifier to
drainage opening
Inner diameter: 15mm
Note
Temperature difference in
between water in drainage
hose and environment may
lead to water condensed on
surface of drainage hose.
Take insulation measures if
necessary.
3
Remove water blocker
Water blocker
1
Hold in arrow indicated
direction, then remove
along the same direction
1
2
Note: Please call your service center or dealer to un-install it as invalid installation may lead to water leak out
of water tank.
Keep temperature
around drainage hose
above zero Celsius
Or water in drainage hose
may get frozen. This may
block the hose from drainage
and lead to water leak and
wet floor.
1
Remove power plug
and water tank
4
Install drainage hose
Insert one end of drainage
hose in drainage elbow.
2
1
Drainage hose installation
Valid installation
Invalid installation
Drainage elbow
Drain water from
high to low elevation
Bent hose
midway
Hose immersed
in water
2
Open up drainage hose
holder
(turn it 90 degree outward
instead of removing it)
5
Install water tank
Invalid installation may lead
to operation failure
YWP33N
Drainage
hose holder
Push it
downward
into place
15