GE PACSystems RX3i Command Line Interface Manual page 51

`
show ip
INET Route Table Flag Values
The flags field in the INET route table represents the flags specified for a given route. The
following is a list of the defined flag values:
Letter
1 RTF_PROTO1
2 RTF_PROTO2
B RTF_BLACKHOLE
b RTF_BROADCAST
C RTF_CLONING
c RTF_PRCLONING
D RTF_DYNAMIC
G RTF_GATEWAY
H RTF_HOST
L RTF_LLINFO
M RTF_MODIFIED
R RTF_REJECT
S RTF_STATIC
U RTF_UP
W RTF_WASCLONED
X RTF_XRESOLVE
GFK-2572
Flag
protocol specific routing flag #1
protocol specific routing flag #2
just discard packets (during updates)
route represents a broadcast address
generate new routes on use
protocol-specified generate new routes on use
created dynamically (by redirect)
destination requires forwarding by intermediary
host entry (net otherwise)
valid protocol to link address translation
modified dynamically (by redirect)
host or net unreachable
manually added
route usable
route was generated as a result of cloning
external daemon translates protocol to link address
Chapter 2 Monitor Level Commands
Description
2
2-35