GE PACSystems RX3i Command Line Interface Manual page 27

`
history
Using the Up Arrow to Select a Command from History
In this example, the last line is the result of four up arrows (↑) which displays the command at
history number 3.
device-name> history
1. alias sh show
2. help
3. alias shcfg "show config"
4. history
5. help
6. history
device-name> alias shcfg "show config"
Using the Up Arrow to Select a Command from History
In this case, the last line is the result of pressing the down arrow (↓) twice, which displays the
command at history number 5.
device-name> history
1. alias sh show
2. help
3. alias shcfg "show config"
4. history
5. help
6. history
device-name> help
GFK-2572
Screen Display
Chapter 2 Monitor Level Commands
2
2-11