Siemens SINUMERIK 840D sl Programming Manual page 614

Tables
15.1 List of statements
DEFAULT
Branch in CASE branch
DEFINE Define macro
DELAYFSTON Define start of a stop delay range
(DELAY feed stop ON)
DELAYFSTOF Define end of a stop delay range
(DELAY feed stop OFF)
DELDTG Delete distance-to-go
DELETE Delete the specified file. The file name can be
specified with path and file identifier.
DELT Delete tool
DIAMCYOF Radius programming for G90/91: ON. The G-
code of this group that was last active remains
active for display
DIAMOF Diameter programming: OFF
1
(Diametral programming OFF)
DIAMON Diametral programming: ON
(Diametral programming ON)
DIAM90 Diameter program for G90, radius progr. for
G91
DILF Length for lift fast
DISABLE Interrupt OFF
DISC Transition circle overshoot -
radius compensation
DISPLOF Suppress current block display
(display OFF)
DISPR Distance for repositioning
DISR Distance for repositioning
DITE Thread run-out path
DITS Thread run-in path
DIV Integer division
DL Total tool offset
DRFOF Deactivate the handwheel offsets (DRF)
15-10
Jump to if
expression
does not fulfill
any of the
specified
values
Implied if
G331/G332
active
Can delete all
files
Duplo number
can be omitted
Radius
programming.
last active G-
code
Radius
programming
for G90/G91
Diameter
programming
for G90/G91
0, ..., 100
Real, w/o
signs
Real, w/o
signs
Real
Real
INT
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
m
m
m 29
m 29
m 29
m 29
m
m
S
S
m
m
m
m
Job planning