Factory Mode Overview - Philips 32PFH5300 Service Manual

Service Modes, Error Codes, and Fault Finding
Table 5-2 Factory mode overview
Default value
Item Item value 32"
0 F/W VERSION Press OK
1 PANEL_ID See table
2 TUNER_ID 4
3 DEMOD_TYPE 3
4 ERR Code: xxx xxx xxx 000 000 000 000 000
xxx xxx
5 CLEAR ERROR BUFFER Press OK
6 NVM ADDRESS 0
7 NVM VALUE 0
8 NVM STORE Press OK
9 NVM COPY TV to USB Press OK
10 NVM READ USB to TV Press OK
11 RESET_PBS_PWD Press OK
12 DIM_LIB RESET Press OK
13 SRC_METER RESET Press OK
14 AMBLIGHT RESET Press OK
15 ACFG RESET Press OK
16 CIPLUS QUERY Press OK
17 CIPLUS UPDATE Press OK
18 EDID UPDATE Press OK
19 TEST PATTERN Press OK
20 VIRGIN_MODE Off
21 E-Fuse On
22 ORT_MODE Off
23 VGA_UART_SWITCH Off
24 DRMWARNING On
25 AGEING MODE Off
26 CLR_TEMP_R 255
27 CLR_TEMP_G 255
28 CLR_TEMP_B 255
29 AUTO_COLOR Press OK
30 ADC_GAIN_R 0
31 ADC_GAIN_G 0
32 ADC_GAIN_B 0
33 ADC_OFFSET_R 128
34 ADC_OFFSET_G 128
35 ADC_OFFSET_B 128
36 YPBPR_PHASE InValid
37 AUD_GAIN_LINEIN 0
38 AUD_GAIN_HDMI 0
39 AUD_GAIN_ATV 0
40 AUD_GAIN_DTV 0
41 AUD_GAIN_USB 0
42 AQ_INDEX 17
43 AUDIO TEST MODE Off
44 AUDIO CHANNEL TYPE 0.0
45 AUDIO SRS Off
46 DUMP PQ FROM TV Press OK
47 LOAD PQ to TV Press OK
48 DUMP AQ FROM TV Press OK
49 LOAD AQ to TV Press OK
50 COPY BIN CHL to TV Press OK
51 COPY BIN CHL to USB Press OK
52 FEF CHECK Off
40" 50"
6-3 Display code overview
0 3
Off Off
223 251
244 235
255 255
0 0
0 0
0 0
128 128
128 128
128 128
16 16
back to
div.table
TPM15.1E LA
Description
Displays the software versions of the supplier, Flash PQ, Smart Picture, BL Dimming,
Source Meter, the Picture Quality checksum, the Dimming library, the Source meter
library, the Flash AQ, MCU and OAD software versions.
Displays and changes the Panel ID with the left and right cursor; be careful changing
this, it can result in not correct displaying the screen!
Displays and changes the Tuner ID with the left and right cursor. Not to be changed
when the tuner is replaced with the correct service part.
Choose demod type.
Values showing the last 5 errors during the last 50 hours of operation, according to
table 5-4 Error code table
Selecting this clear all current error codes.
NVM address 0 to 8191, Use Item 6 to change and 7 to store the data to the correct
NVM address
Displays the value at the NVM address of item 5
Use this option to save the data of item 6 to NVM address of item 5
Use this to store the NVM data to the REPAIR folder of a FAT formatted USB memory
stick. The TV will write two files in the REPAIR folder of the memory stick. It will create
this folder if it does not exist. The items are "Channel list", "Personal settings", "Option
codes", "Display-related alignments" and "History list". In case the download to the
USB stick was not successful "Failure" will appear. In this case, check if the USB stick
is connected properly. Now the settings are stored onto the USB stick and can be
used to download onto another TV or other SSB. Uploading is of course only possible
if the software is running and if a picture is available. This method is created to be
able to save the customer's TV settings and to store them into another SSB.
Use this to store the NVM data from the USB memory stick to the TV. The TV will save
the two files which were created in item 8 to the NVM of the set. Use these options
when replacing a SSB. When "USB to TV Success" is displayed remove the power
and restart the TV
Use this to reset the Child Lock
Reset the Dimming
Reset the Source meter
Reset Ambilight
Reset ACFG
Shows the Validity of the CI+ key and the supplier information
Used to enter a new CI+ code into the NVM. This can only be used when no CI+ code
exists in the NVM
Used to enter a new EDID codes into the NVM
With the "left" and "right" keys of the remote control various test patterns can be
chosen
Use this to return the set to virgin mode. Depends whether the set has been used
already.
E-fuse mode
ORT mode
When switched "on" the VGA port can be used for UART logging.
Warning the data rights management
Use this for aging a new LCD panel
Red colour temperature setting
Green colour temperature setting
Red colour temperature setting
PC: any pattern that has black and white, YPbPr: SMPTE bar (colour bar), any timing.
Red ADC gain
Green ADC gain
Blue ADC gain
Red ADC offset
Green ADC offset
Blue ADC offset
Not available for this chassis
Line-in audio gain
HDMI audio gain
Analogue TV audio gain
Digital TV audio gain
USB audio gain
Audio Quality index
Used for audio testing during production
Defines the installed speaker system
SRS Audio
Saves the picture quality data to a file "pq.bin" to the root of a FAT formatted USB
memory stick
Loads the picture quality data from a file "pq.bin" in to the TV
Saves the audio quality data to a file "AQ.bin" to the root of a FAT formatted USB
memory stick
Loads the audio quality data from a file "AQ.bin" in to the TV
Copy the USB channel list to TV
Copy the TV channel list to USB
FEF Check
5. EN 15
2015-Jun-12