5. Functional Blocks
5.1 PCMCIA
5.1.1
Block Description
Figure 5.1 shows the PCMCIA control block. As shown in Figure 5.1, the PCMCIA control block contains a
controller (MR-SHPC-01 V2 from Marubun), a 68-pin PC card interface connector (CN3) and a power supply
controller IC (TPS2211DB from TI). This controller interfaces with the card(s) conforming to the PC Card
Standard 97 and has the following features:
• Internal memory windows (2 windows) and I/O window (one window)
•Card access timing adjustment function
• One-step read/write buffer
• Endian internal control circuit
• Support for 5.0V/3.3V cards
• External buffer not required
• Internal interrupt steering function
• Power-down function
• Internal suspend function
There are four kinds of controller interrupts (SIRQ3 to SIRQ0). Inputs to the H7760 are made by the IRL
codes. For details, refer to Marubun's MR-SHPC-01 V2 Manual.
Marubun Homepage:
SH7760
/IRL3
/IRL2
/IRL1
/IRL0
http://www2.marubun.co.jp
System bus I/F
FPGA
System VCC
+3.3V
+5.0V
Figure 5.1 PCMCIA Controk Block
Marubun PCMCIA controller
MR-SHPC-01 V2T
/SIRQ3
/SIRQ2
/SIRQ1
/SIRQ0
/CVCC3
Power supply
/CVCC5
control register
CVPP0
CVPP1
(TPS2211IDB)
CARD PW GOOD
VCC(+5.0Vv/+3.3V/0V)
VPP(+5.0Vv/+3.3V/0V)
29
PC Card I/F
CARD slot
CN3
Card VCC