Huawei OceanStor N8500 T Series Installation Manual page 256

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
4.
5.
6.
7.
Step 8 Change the system time and time zone.
Changing a system zone will temporarily interrupt services. Therefore, perform this operation
when no services are running.
1.
2.
3.
4.
5.
Step 9 Configure event processing policies.
The event processing function enables timing or periodic collection of alarms and logs,
facilitating system management. This function performs:
l Email service
l SNMP service
l Syslog service
Issue 02 (2015-09-22)
l Exit the ISM welcome page. On the menu bar, choose System > Discover Device. The
Discover Device dialog box is displayed.
Enter the user name and password. The default user name is master, and the default
password is Master@storage.
NOTE
You can change the password of user master in either of the following ways. Any change made for
the password of user master of the clustered NAS engine will be synchronized to the password of
user admin of the storage unit. After the synchronization, the passwords of user master and user
admin are the same. Change your password after initialization for security purposes.
l Change the password on the ISM: In the navigation tree, choose Cluster NAS Storage
System > Settings. In the function pane on the right, select Device User Management. In the
Device User Management dialog box that is displayed, select the user name whose password
that you want to change. Click Modify. Enter the old password and a new password, and then
verify the new password.
l Change the password on the CLI: Log in to the engine node as master. Run admin passwd or
admin passwd master to change the password.
Set Authentication Mode to Local Device.
Set the device type to N8000.
In the Discovery Modes area, select an appropriate discovery mode.
Devices can be discovered by IP address. When discovering the clustered NAS storage
system, use the console IP address configured for the NAS engine node.
NOTICE
In the navigation tree of the ISM, choose Clustered NAS Storage System > Device
Info.
Select a desired clustered NAS engine.
In the function pane, click the Clustered Nodes tab.
Click System Management.
The NAS System Management dialog box is displayed.
Click the Set Time tab to modify the system time and time zone.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 System Initialization
247