Features - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

4.4.1

Features

Industry-proven MegaRAID
●
Flexibility for both SAS 2.0 and SATA II / SATA III
●
Advanced management and configuration suites
●
Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60
●
Optional RAID controller FBU (Flash Backup Unit)
●
Offers advanced MegaRAID functionality to integrated LSI SAS
●
3.3 V / 12 V PCIe add-in card
●
8-lane 5.0 / 8.0 Gbit PCIe host bus
●
8 SAS/SATA ports
●
Each SAS/SATA port supports SSP, SMP and STP
●
Support for the following STP features:
●
– Addressing of SATA targets through expander
– Native Command Queuing (NCQ)
Support of the following SSP features:
●
– Wide port functionality (2 or 4 Phys from a single quad port,
or 8 Phys over two quad ports )
or
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
Mini SAS 4i SFF-8087 connectors
2
●
Hot-plug drives
●
SGPIO interfaces for signaling of SAS/SATA ports
●
Hardware XOR for RAID parity calculations
●
72-bit wide 1 GB of 1333MHz DDR3 SDRAM (with ECC)
●
Modular RAID Controllers
Modular RAID 6Gb/s (SAS2.0)
®
data protection
55