Options
11.3 DC link adapter
11.3.6
Electrical Connection
Required tools:
• Hexagon-socket spanner (size 6)
• Suitable tool for tube clips (e.g. flat-bladed screwdriver)
Table 11-15 Electrical connection of the DC link adapter for a 150 mm module
Route the cable through the tube clip and insert it into the
DC link adapter.
Secure the tube clip.
Only shielded connection cables should be used.
The DC link adapter can be fitted on the right or left.
11-26
Secure the cable.
The cable is connected.
Equipment Manual Booksize Cold-Plate Power Sections
Manual, (GH4), Edition 06.2005, 6SL3097-2AJ00-0BP2