Drive Concept - Siemens SINAMICS S120 Getting Started

Drive Concept

This "Getting Started" manual uses simple examples to describe how a standard
drive application is configured.
The standard application uses a minimum SINAMICS S120 configuration.
Commissioning is carried out using the STARTER commissioning tool.
This chapter provides an introduction to the SINAMICS drive concept.
Note
A detailed description of the drive system is available in the Installation and
Start-Up Manual /IH1/ and Equipment Manuals /GH1/ and /GH2/ (see References
in the appendix).
 Siemens AG, 2004. All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition
1
1-15