Maintenance Check Item
Check the instrument
operation.
Lubricate all the grease
fittings.
2
Touch up any damaged
paint.
Inspect the seat belt.
1
Check the glow plug and injector nozzles if the engine is hard to start, there is excess smoke, or the engine runs rough
2
Immediately after every washing, regardless of the interval listed
3
If the indicator shows red
Notation for Areas of Concern
Inspection performed by:
Item
Pre-Maintenance
Procedures
Raising the Machine
DANGER
Mechanical or hydraulic jacks may fail to
support the machine and cause a serious
injury.
• Use jack stands to support the raised
machine.
• Use only mechanical or hydraulic jacks to
lift the machine.
Raising the Front of the Machine
Important:
Ensure that no cables or hydraulic
components are between the jack and the frame.
For the week of:
Mon.
Tues.
Wed.
Thurs.
Date
Information
1. Front jacking point—frame
tube
2. Front jack stand
point—front axle tube
1.
Chock the 2 rear wheels with chocks to prevent
the machine from moving.
2.
Position the jack securely under the desired
jacking point.
3.
After raising the front of the machine, use an
appropriate jack stand under the machine frame
to support the machine.
40
Fri.
Sat.
Figure 37
3. Front of the machine
Sun.
g299729