CAUTION:
1. After removal of the signature delivery assembly, the drive belt [4]
remains on the motor shaft in the back. Be careful not to drop this belt into
the machine.
2. When reinstalling the signature delivery assembly, be sure to hang the
drive belt on the motor shaft and the pulley [5] of the signature delivery
assembly. It will be easy to reinstall the signature delivery assembly if the
trail edge retaining motor (M3) is removed before reinstalling it.
[5]
9) Remove the frame upper cover [1].
- 4 screws [2]
[4]
F-2-52
[2]
[1]
F-2-53
10) Remove the top cover switch [1].
- 2 screws [2]
[2]
11) Remove the top cover mount [1].
- 5 screws [2]
[2]
[1]
12) Release the harness from the three wire saddles [1], and then remove the
six connectors [2].
[2]
[1]
Chapter 2
[1]
F-2-54
[2]
F-2-55
[2]
[2]
F-2-56
2-13