Siemens 2AI 2/4WIRE HF Manual page 10

Properties
1.1 2AI 2/4WIRE HF analog electronic module (6ES7134-4MB02-0AB0)
Permissible potential difference
•
•
•
•
•
Power dissipation of the module
Diagnostics function
•
•
•
Process interrupts are only sent if the process interrupt mechanism is not overloaded.
2
Measuring principle
Conversion and cycle time:
Integration time can be assigned parameters
•
•
•
•
Noise suppression for f = n x (f1 ± 0.5%),
(f1 = interference frequency)
•
•
Crosstalk between the inputs
Operational limit
(in the entire temperature range, with reference to
the input range)
Intrinsic error limit
(operational limit at 25°C)
Temperature error (with reference to the input
range)
Linearity error (with reference to the input range)
Repeatability
(in steady state at 25°C with reference to input
range)
10
Between channels (U )
CM
Between M and the central grounding point
ANA
(U )
ISO
Insulation tested
Current consumption
From the load voltage L+ (no encoder supply)
Group error
Diagnostic functions readable
Process interrupts
2
Interference frequency suppression in Hz
Conversion time in ms (per channel)
Cycle time of the module in ms (per module)
Resolution
Common-mode interference (U
Series-mode interference
(peak interference value < rated value of input
range)
140 VDC/100 VAC (with isolated power supply
for the measuring transducer)
75 V DC/60 V AC
500 VDC
Max. 48 mA
Typically 1.2 W
Status, interrupts, diagnostics
Red "SF" LED
Yes
Configurable, violation of upper and lower limits
Analog value generation
Sigma-Delta
Yes
60
17
18
±20 mA/15 bits + sign
4 to 20 mA/15 bits
Suppression of interference, limits of error
)
Min. 100 dB
SS
Min. 90 dB
Min. -100 dB
±0.1% with interference frequency suppression
±0.2% without interference frequency
suppression
±0.05% with interference frequency suppression
±0.1% with interference frequency suppression
± 0.003 %/K
± 0,01 %
± 0,01 %
2 AI I 2/4WIRE HF analog electronic module (6ES7134-4MB02-0AB0)
50 No
20 0,04
21 0,5
Manual, 04/2007, A5E01076111-01