Replacing A Skylight Magnetic Lock - Huawei FusionModule2000 V500R002C03 Maintenance Manual

FusionModule2000 Smart Modular Data Cente
Maintenance Guide
Step 6 Synchronize the parameters of the skylight actuator on the ECC800 WebUI.
Step 7 On the WebUI of the ECC800, choose Monitoring > System > ECC800 > Controls >
Delete device with communication failure, and click Submit.
Step 8 Log in to the ECC800 WebUI, and edit the plan view by adding new devices.
Step 9 Check the parameters and communication status of the skylight actuator to ensure normal
communication.
----End

6.4.15 Replacing a Skylight Magnetic Lock

Impact on the System
The rotating skylight cannot be controlled.
Preparations



Procedure
Step 1 Open the rotating skylight.
Step 2 Disconnect the cable delivered with the skylight magnetic lock from the cascading terminal of
the lock.
Step 3 Remove the skylight magnetic lock to be replaced.
Figure 6-49 Removing a skylight magnetic lock
Step 4 Install the new skylight magnetic lock.
Issue 03 (2019-12-04)
Tools: Phillips screwdriver, step ladder (2 m)
Material: skylight magnetic lock
Skill requirement: hardware installation engineers
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
80