FusionModule2000 Smart Modular Data Cente
Maintenance Guide
6.4.1 Parts Replacement for the ECC800
For details about parts replacement for the ECC800, see the "Parts Replacement" section in
the ECC800 user manual.
Table 6-8 Replaceable ECC800 parts
No.
1
2
3
4
5
6
6.4.2 Parts Replacement for the Video Surveillance System
6.4.2.1 Replacing the VCN500 Hard Drive
Prerequisites
Data in the hard drive has been backed up.
Impact on the System
Information cannot be stored on the VCN500.
Preparations
Procedure
Step 1 Put on an ESD wrist strap (or ESD gloves) and insert the ground terminal into the ESD jack in
the cabinet.
Step 2 Remove the faulty hard drive.
1.
2.
Issue 03 (2019-12-04)
Replaceable Part
Main control module
Power supply unit (PSU)
Antenna
SIM card
Micro-SD card
SIM card inside the SMS module
If you need to replace any other parts, contact Huawei technical support.
Tools: Phillips screwdriver, ESD wrist strap (or ESD gloves)
Materials: VCN500 hard drive
Press the button on the hard drive panel to open the ejector lever, as shown by (1) in
Figure
6-14.
Pull out the hard drive for about 3 cm, wait for 30 seconds at least until the hard drive
stops rotating, and pull it out, as shown by (2) in
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
Figure
6-14.
51