DETAILS OF THE PRODUCT
2.3
Product description
The programmer is designed for use with a solar heating system. It can be mounted on a wall or is
integrated in a solar pump station.
In normal operating mode, the display screen on the programmer stays illuminated in green/yellow for
5 minutes after the last button was pressed (activated by pressing the rotary selector
example).
The display shows the following:
Pump and valve status (as simple schematic diagram not representative of actual system)
•
System data (e.g. temperatures)
•
Selected functions
•
Fault messages
•
1 5
Fig. 2
Example of screen display
8
6 720 644 593 (2010/04)
, for
ok