Table of Contents
Advertisement
INSTALLATION (FOR ENGINEERS ONLY)
3
Fig. 11
Fitting the volumetric flow meter and temperature sensors
1
Volumetric flow meter
2
Return temperature sensor
3
Flow temperature sensor
The heat meter is used only to check system function. It is not capable of metering to
EN 1434 or determining yield. Calculation of yield requires a device with a calibration
certificate (optional accessory), usage data (water volume, room heating heat
requirement), weather data and system simulation.
B Wire up electrical connections as shown in Section 5.
18
1
2
6720613732-07.1 SD
6 720 644 593 (2010/04)
Advertisement
Table of Contents
