Siemens Sinamics G120P Instruction Manual page 73

Hardware preparation
• Insert the STARTER DVD into your DVD drive
• Install the STARTER software by following the setup wizard
• Connect the USB cable to the Control Unit
• Connect the other end to the USB port of your PC
You must install the USB driver if you are connecting the converter and PC together for the first time.
Windows 7 automatically installs the driver; for older Windows versions, you must confirm the auto-
matic installation.
The latest version of STARTER
can also be downloaded at:
http://support.automation.
siemens.com/WW/view/
en/26233208
NOTE
61