09 Software; Display Function For Actual Operation; Meter - Kenwood TS-890S In-Depth Manual

Hf/50mhz transceiver

Hide thumbs Also See for TS-890S:

Table of Contents

09 SOFTWARE

The TS-890S has a 7-inch TFT color display, which is the same size as the display size of the top-model TS-990S. The

TS-890S also supports a filter scope display, bandscope display, audio scope display, and transmission digital meter, in

addition to basic information such as frequency, mode, and S meter. Operations such as contest operation are strongly

supported with a variety of displayed contents and good visibility.

The type of meter to display on the top-left of the display can be changed according to preference. There is an analog

meter type resembling the meters on the TS-930 and TS-940, and a digital meter type which indicates 3 types of

information during transmission. Although an analog meter is virtual, because the meter represents the face of the

transceiver, we have carefully devised the scale plate that is displayed on the rear panel, the direction and angle of the

pilot lamp which illuminates the scale plate, the needles and their shadows, and the glossy texture, etc.

Configure the meter type in Menu 0-09 "Meter Display Pattern". The meter type can be quickly switched by touching the

meter part of the LCD without entering menu mode.

Fig. 61 Analog (White)

Fig. 62 Analog (Black)

Fig. 63 Digital

Table of Contents

Show Quick Links

Table of Contents