Additional Safety Information & Instructions And Residual Risks For Safety Integrated - Siemens SINUMERIK 840D sl Function Manual

System features
4.5 Safety information & instructions and residual risks
4.5.2 Additional safety information & instructions and residual risks for Safety Integrated
Risk reduction for plants and machines
Safety Integrated can be used to minimize the level of risk associated with machines and
plants.
Safe operation of the machine or plant with Safety Integrated is however only possible if the
machine manufacturer
● is familiar with and observes every aspect of this technical user documentation, including
● Carefully constructs and configures the machine/plant. A careful and thorough acceptance
● Implements and validates all the measures required in accordance with the machine/plant
Depending on the risk assessment of the machine or plant, the safety information &
instructions and residual risks listed in this documentation must also be assigned, when
required, to a hazardous level other than that specified in this documentation.
The use of Safety Integrated does not replace the risk assessment of the machine or plant
to be performed by the machine manufacturer as specified in the EC machinery directive!
In addition to Safety Integrated, further risk reduction measures must be implemented.
46
DANGER
the documented general conditions, safety information, and residual risks.
test must then be performed by qualified personnel and the results documented.
risk analysis by means of the programmed and configured Safety Integrated Functions or
by other means.
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated