Frame System - Siemens SINUMERIK 840Di sl Programming Manual

1.3.5

Frame system

The frame is a self-contained arithmetic rule that transforms one Cartesian coordinate
system into another Cartesian coordinate system.
It is a spatial description of the workpiece coordinate system
The following components are available within a frame:
• Zero offset
• Rotate
• Mirroring
• Scaling
These components can be used individually or in any combination.
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Fundamental Geometrical Principles
1.3 Position of coordinate systems
31