Table of Contents
Advertisement
[MyChoice setup]
The MyChoice setup feature enables the
configuration of the the MyChoice PayTV
channel list and 'the other'channels list.
In the event that the MyChoice function is
activated and a valid PIN code is received, the
channels in R0 will become available to the
guest.
In the event that the MyChoice function is
activated and no valid PIN code is received,
the channels in R1 will become available to the
guest.
Mark the channels that are to be included in list
R0 and R1.
[ThemeTV setup]
The ThemeTV setup feature enables the
configuration of the UI and the configured
channels.
For country specific themes, the Theme 1 up to
Theme 12 can be configured.
For the specific 'other' themes, Theme 13 up to
Them 15 can be configured.
Mark the channels that are to be included in
the themes.
Store Settings
To confirm the changes in the PBS Setup menu
the changes 'MUST' be stored.
[Action]
Press ► or OK to store the new settings.
Smart Clone
Place a USB Memory stick in the USB side I/O
connector.
Layer 1
Layer 2
Smart Clone
USB to TV
TV will read and store Cloning data from USB
stick.
EN
38
Layer 3
Press OK or ►
RF Download
Instead of using USB memory device to
do cloning (tbd) and firmware update,
this upgrading is also possible using the RF
infrastructure. This is covered by Philips
Hospitality RF Download and allows a
simultaneous upgrade of all installed televisions.
[SW Types]
Defining the software parts to be upgraded:
• [SSB Firmware]: TV Firmware
• [SSB NVM]: TV Settings
• [StandBy Firmware]: Firmware for the
StandBy CPU
• [Theme TV]: Supporting files for
ThemeTV:
- R1.png – R15.png
- R1s.png – R15s.png
- Background.png
- Header.png
- Footer.png
• [All]: All of above
[Program Info]
This function is to set the necessary DVB
parameters to locate the proper VSecure RF
channel to load the VSecure RF Static or RF
Dynamic key(s):
[Frequency]
Frequency of MUX (0706)
[Medium]
Cable or Antenna
(DVB T/C)
[Service ID]
# # # # #
[ONID]
# # # # #
[NID]
# # # # #
[TSID]
# # # # #
[Symbol Rate] # . # # #
[Modulation]
QAM16, QAM32,
QAM64,
QAM128, QAM256
Above parameters must match head-end configuration.
[Start Download]
To initiate RF Download just press OK or ►.
(00001)
(00000)
(00000)
(00000)
(6.900)
Hide quick links:
Advertisement
Table of Contents
