Automatic update
To set the TV to update digital TV channels
automatically, leave the TV in standby mode.
Once a day, the TV updates earlier found
channels and stores new channels. Empty
channels are removed from the channel list.
If a channel update is performed, a message
appears at startup.
If you do not want this message to appear
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Channel update
message] > [Off], then press OK.
•
To disable automatic updates In the
[Channel installation] menu, select
[Automatic channel update] > [Off].
Select audio language
If the TV channel has multiple or dual sound
broadcast, you can select the preferred audio
language.
1
While watching TV, press
•
[Audio language] : Select the audio
language for digital channels.
•
[Dual I-II] : Select the audio language
foranalogue channels.
24
EN
.
Install channels
Automatic install
When the TV was switched on for the
first time, a full installation of channels was
performed. You can redo this full installation
again to set your language, country and install
all available TV channels.
Note
•
The PrimeSuite TV is capable of tuning to both
DVB-T and DVB-C. Please refer to attachment A.
1
Press .
2
Select [Setup] > [Search for channels],
then press OK.
3
Follow the on-screen instructions to
complete the channel installation.
4
Once complete, select [Finish], then
press OK.
Tip
•
Press
to see the channel list.
Note
•
During installation, leave [Settings] unchanged
unless your digital provider provides you with the
specific values to enter.
•
When digital TV channels are found, the list of
installed channels may display empty channel
numbers. You can rename, reorder or uninstall
these channels.
Access DVB-C or DVB-T channels
This TV contains specific tuning algorithms
supporting local cable operators. This can
impact DVB-T tuning.
Please refer to attachment in case no or less
channels are found.