Table of Contents
Advertisement
12 Introduction to the manual
Target audience
The manual is intended for people who install, start up, use and service the safety function.
Read the manual before working on the unit. You are expected to know the fundamentals
of electricity, wiring, electrical components, electrical schematic symbols, and functional
safety.
Exclusion of liability
ABB is not responsible for the implementation, verification and validation of the overall safety
system. It is the responsibility of the system integrator (or other party) who is responsible
for the overall system and system safety.
The system integrator (or other responsible party) must make sure that the entire
implementation complies with the instructions in this manual, all relevant standards, directives
and local electrical code, and that the system is tested, verified and validated correctly.
Quick reference guide for taking a safety function into use
Task
Connect the user-defined wiring (if any). See the wiring instructions in this manual and the circuit dia-
grams delivered with the drive.
Check and/or set the safety function related parameters (as listed in this manual).
Do the acceptance test to ensure that the implemented system meets the safety requirements. Instruc-
tions for the acceptance test can be found in this manual.
Document the acceptance test procedure. Guidelines for the acceptance test report can be found in
this manual.
Related manuals
Manual
Drive hardware
Mechanical installation instructions for ACS880 multidrive cabinets
Electrical planning instructions for ACS880 multidrive cabinets and modules
Supply units
ACS880-207 IGBT supply units hardware manual
ACS880-307 (+A003) diode supply units hardware manual
ACS880-307 (+A018) diode supply units hardware manual
ACS880-907 regenerative rectifier units hardware manual
Inverter units
ACS880-107 inverter units hardware manual
Drive firmware
ACS880 primary control program firmware manual
ACS880 primary control program quick start-up guide
ACS880 diode supply control program firmware manual
ACS880 IGBT supply control program firmware manual
ACS880 regenerative rectifier control program firmware manual
PC tools
Code
3AUA0000101764
3AUA0000102324
3AUA0000130644
3AUA0000102453
3AXD50000011408
3AXD50000020546
3AUA0000102519
3AUA0000085967
3AUA0000098062
3AUA0000103295
3AUA0000131562
3AXD50000020827
Advertisement
Table of Contents
