Information
responses
Result
codes
3.5.3 Defined Values
<value>:
0
numeral form.
1
detailed strings.
If no <value> is included, it is equivalent to the effect that the <value> is 0.
3.6 Backspace character S5
3.6.1 Command Syntax
Command
S5=<value>
S5?
3.6.2 Description
This command is used to set the backspace character S5. S5 saves the backspace
character in the form of ASCII code value. This character is sent by TE, and means to
delete the previous character. It is identified by MS.
3.6.3 Defined Values
<value>:
0-127
3.7 RSSI query function command +CSQ
3.7.1 Command Syntax
Command
+CSQ
Issue 18 (2009-06-22)
V0
<text><cr><lf>
<numeric code><cr>
MS sends the abbreviated header and tail, and uses the result code in the
MS sends the complete header and tail, and uses the result code in the form of
The S5 character is set in the form of ASCII code value.
Possible response(s)
<CR><LF>+CSQ:
<rssi>,<ber><CR><LF><CR><LF>OK<CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF><value><CR><LF><CR><LF>OK<CR><LF>
AT Command Interface Specification
V1
<cr><lf>
<text><cr><lf>
<cr><lf>
<verbose code><cr><lf>
Page 29 of 169