Table of Contents
Advertisement
3
3.1 Terminal error report command +CMEE
3.1.1 Command Syntax
Command
+CMEE=<n>
+CMEE?
+CMEE=?
3.1.2 Description
This command is used to set whether to use result code: +CME ERROR:<err>
indicates the error related to MS. When you set to use result code, the MS-related
error will generate a result code: +CME ERROR: <err>, which will replace the ordinary
ERROR result code. If the error reasons are not related to MS, the ordinary ERROR
will still be returned.
3.1.3 Defined Values
<n>:
0
error occurrence.
1
2
the error.
<err>:
The value is given in the CME ERROR list in the Appendix.
Issue 18 (2009-06-22)
Query of Basic Information and
Description of Set Interface
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF>+CMEE: <n><CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CMEE:
<CR><LF><CR><LF>OK<CR><LF>
Do not use +CME ERROR :<err>result code, only ERROR is returned in case of
Use +CME ERROR :<err>result code, <err> adopts the error code value.
Use +CME ERROR :<err>result code, <err> adopts the detailed string value of
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
(list
of
supported
<n>s)
Page 26 of 169
Advertisement
Table of Contents
