[4] Registering system controllers to a group
(1) To register system controllers to a group, touch the
"System controller registration" button under the target
group name. A screen to select the units will appear.
Select the address numbers of the system controllers to
be registered.
The selected unit addresses will appear with an orange
frame. Touch again to deselect.
Note: Each group can contain up to four remote and system
controllers combined.
[5] Registering AHC to a group
(1) To register AHC to a group, touch the "AHC registration"
button under the target group name. A screen to select the
unit will appear.
Select the address number of the AHC to be registered.
The selected unit address will appear with an orange
frame. Touch again to deselect.
Note: Each group can contain one AHC.
Note: AHC must be registered to a group in which air
conditioners are registered. Do not register AHC to a
group in which Air To Water (PWFY) units, LOSSNAY
units, HWHP (CAHV) units, or general equipment (via
PAC-YG66DCA) are registered.
WT07190X01
79