Booting Hp 9000 Servers - HP -UX 11i Installation And Update Manual

Newer server boot
menu
Step 1. Determine the boot device that contains the Install CD. The Alternate
Step 2. To search for available boot devices, type: search (or sea)
Newer server
search results

Booting HP 9000 Servers

As noted previously, you can halt the server autoboot process and
redirect it to boot from the desired media device. To do so, press any key
during the autoboot process to display a Main Menu:
----------------------- Main Menu
------------------------------------
Command
BOot [PRI|ALT|<path>]
PAth [PRI|ALT] [<path>]
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu
INformation menu
SERvice menu
DIsplay
HElp [<menu>|<command>]
RESET
---------
Main Menu: Enter command or menu >
You only need to enter the initial capital letters for each command.
Boot Device is typically set to the CD drive. If this is the case, enter:
bo alt
Here is a typical output:
==============================================================
========
Searching for potential boot device.
This may take several minutes.
To discontinue, press any key.
Path Number
- -
P0
access media
P1
access media
P2
media
P3
Appendix A
Description
Boot from specified path
Display or modify a path
Displays or sets boot values
Displays hardware information
Displays service commands
Redisplay the current menu
Display help for menu or command
Restart the system
Device Path
-
56/52.0 (dec)
56/52.3 (dec)
56/52.4 (dec)
56/52.6 (dec)
Booting HP 9000 Systems
Booting HP 9000 Servers
Device Type
Seq. record
Seq. record
Random access
Random access
91