HP -UX 11i Installation And Update Manual page 49

Updating NDS
update-ux
removes DFS
Installing
MC/ServiceGuard
Updating
MirrorDisk/UX
update-ux performs these operations:
— Checks for minimal disk space in /, /stand, /opt, /usr and /var on
a system using LVM.
— Removes HP-UX 11.0 OS bundle wrappers.
If any requirements are not met, update-ux will display an appropriate
message and exit.
update-ux installs a new version of HP-UX Software Distributor (SD),
plus any patches to it, from the source depot before initiating an OS
update.
If you plan to update Netscape Directory Server (NDS) along with
HP-UX 11i, see "Updating Netscape Directory Server" on page 67. The
update-ux command does not replace NDS with a new version by default.
If the Distributed File System (DFS) is installed and in use on your
HP-UX 10.20 system to manage large numbers of files, update-ux will
remove it and associated data during the update to 11i. If you need to
continue using DFS, STOP! Do not update to HP-UX 11.x or 11i.
If you are planning to install the HP-UX 11i Mission Critical OE,
MC/ServiceGuard will be automatically installed, removing any previous
version of MC/ServiceGuard on the system. If you currently have or will
require the ServiceGuard OPS Edition on the system rather than
MC/ServiceGuard, review "Installing ServiceGuard Products" at the
back of this chapter before continuing.
If you are updating a system containing MirrorDisk/UX and wish to
continue using that product, and you are updating to either of the
HP-UX 11i Technical OEs, you will need to re-install patch PHKL_23333
after the update. Although this patch is installed with the 11i update,
you'll need to re-install it after the update to 11i to re-enable the product.
See Chapter 4 for help installing patches.
Chapter 2
Migrating to HP-UX 11i
Updating HP-UX 10.20/11.0 to 11i
49