Siemens Cerberus CS1140 Commissioning page 51

DC1157 Õ represented
in the physical structure
by 3 separate devices
('DE DS11 in')
AlgoWorks 00ST0245
File: C:\AWDATA\DEMO_VPB\DCR001L1.TXT
Listing of the logical structure (26447,19533,31046)
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
001/AR/demo system VPB
001.001/SE fire/2nd floor west
001.001.001/ZO single/1/laboratory 201
>001.001.001.001/001: DO1151 4
>001.001.001.002/001: DO1151 2 AI
>001.001.001.003/001: DO1151
>001.001.001.004/001: DO1151
001.001.002/ZO multi/2/laboratory 203
>001.001.002.001/004: DOT1151 6 Window
>001.001.002.002/004: DOT1151 5 Door
Input / output module DC1192
Fire & Security Products
Siemens Building Technologies Group
Zone Zone Zone
'FU DS11i'
Station
09–APR–1997, 14:42
(1801,1)
(1701,425)
(1601,426)
(1501,427)
(1501,428)
(1501,429)
(1501,430)
(1602,445)
(1501,446)
(1501,447)
Select second element
5. Link nodes together
Õ Function Structure Õ Link
6. Repeat steps 4 and 5 for the third of the elements corresponding to the DC1157
Procedure if some of the inputs of the same DC1157 are used only after commis-
sioning has already been carried out
1. Generate and link new logical elements and physical devices
2. In the physical structure open nodes of a device already in operation
3. Note D-Bus addresses and device ID
4. Enter the above value in all newly generated devices
Possible uses
The DC1192 input / output modules can either be used as an input module for the opera-
tion of a collective line (DC1192c) or as an output module to activate monitored alarm
devices (DC1192h).
Procedure when used as an input module
1. Switch over from the physical structure to the localization structure
Õ Function Loc. Õ Commissioning
Logical
e.g. 'EL digital'
structure
Links
Physical
structure
Select DC1157
Õ identified as localized, because
an element has already been allo-
cated !
Function unit
Localization
'104: DC1157'
structure
DC1157 Õ represented in
the localization structure by
one device
47
e1249d 2
01.1999