Table of Contents
Advertisement
SIMATIC Industrial PC SIMATIC IPC547C
SIMATIC
Industrial PC
SIMATIC IPC547C
Getting Started
06/2009
A5E02411398-01
Introduction
______________
______________
Description
______________
Application Planning
______________
Installing
______________
Connecting
______________
Commissioning
______________
Dimension drawings
______________
Appendix
1
2
3
4
5
6
7
A
Advertisement
Table of Contents
Related Manuals for Siemens SIMATIC IPC547C
Summary of Contents for Siemens SIMATIC IPC547C
- Page 1 Introduction ______________ SIMATIC Industrial PC SIMATIC IPC547C ______________ Description ______________ Application Planning SIMATIC ______________ Installing Industrial PC ______________ SIMATIC IPC547C Connecting ______________ Commissioning Getting Started ______________ Dimension drawings ______________ Appendix 06/2009 A5E02411398-01...
- Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 3: Table Of Contents
Reinstalling the software......................27 Dimension drawings ..........................29 Dimensional drawing of the device ....................29 Dimensional drawing for the use of telescopic rails..............30 Appendix..............................31 Guidelines and declarations......................31 Certificates and Approvals ......................32 Service and support ........................34 Index................................ 35 SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... - Page 4 Table of contents SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 5: Introduction
The operating instructions provide useful information on many topics, such as the hardware expansion options, modification of the system configuration and technical data. Conventions The term "PC" or "device" is sometimes used to refer to the SIMATIC IPC547C product in this documentation. Note... - Page 6 Introduction SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 7: Description
Blanking panel Option for installing a cover for external ports ④ Expansion slots 4 x PCI, 1x PCIe x16, 1x PCIe x8 (1 Lane), 1x PCIe x1 ⑤ Connection elements ⑥ Power supply connection SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 8: Operator Controls
(The on/off button signal does not cut off power to the PC!) ② Power LED Status display for redundant power supply • LED lit green: Power supply in operation If there is no redundancy, you will be hear an acoustic signal permanently. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 9: Connection Components
Dual-head adapter DMS59 connector on dual-head graphics card (optional) For unique labeling, the LAN interfaces are numbered on the housing. The numbering by the operating system may deviate from this. Using the graphic card SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... - Page 10 ① IEC connector for the AC power supply to the device. The permitted power range is 100 VAC to 240 VAC. ② On / Off switch ③ LED of power supply ④ Alarm reset SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 11: Status Indicators
No access ③ Display for hard disk • access GREEN Access • Hibernate, switched off or unplugged ④ POWER PC operating status • display Windows standby • GREEN flashing PC in operation • GREEN SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... - Page 12 Cable disabled • Interface disabled • No activity • YELLOW Data transfer active For unique labeling, the LAN interfaces are numbered on the housing. The numbering by the operating system may deviate from this. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 13: Application Planning
● Verify that the shipment contains the complete unit and your separately ordered accessories. ● Please inform your local dealer of any disagreements or transport damages. ● Please inform Siemens AG by means of the enclosed SIMATIC IPC/PG quality control report form. SIMATIC Industrial PC SIMATIC IPC547C... - Page 14 S VP ... Order no. 6AG4104-1 ... Microsoft Windows Product Key Ethernet address 1 Ethernet address 2 Device equipment You will find a list of device equipment on a label behind the front door. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 15: Ambient And Environmental Conditions
● The connected or added peripherals must not introduce a counter emf greater than 0.5 V into the device. WARNING Failure to comply with these requirements for system installation shall render approvals to UL 60950-1, EN 60950-1 void and leads to the risk of overheating and injury! SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 16: Access Protection
On/Off button (power button) are being used. Note In Windows, you have the option of setting the function of the On/Off button to meet your requirements. You can make these setting in the "Power Options" menu. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 17: Installing
Refer to the sections Technical data of the telescopic rails (Page 18) and Dimensional drawing for the use of telescopic rails (Page 30) for more detailed information. Position of the mounting holes ① for angle brackets or telescopic rails SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 18: Technical Data Of The Telescopic Rails
Full extraction length At least 470 mm Rail thickness Maximum 9.7 mm Mounting screws M5 x 6 mm The mounting screws of the telescopic rails may not protrude by more than 5 mm into the enclosure. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 19: Connecting
• The computer in question must be turned off and the power supply connector should be plugged in. • During the measurement, all cables from the plant to the computer should be connected. • All other components in the plant must be active. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 20: Connecting The Device To Power
SIMATIC PCs with a PFC. UPS characteristics are described and classified in the standards EN 50091-3 or IEC 62040-3. Devices with sinusoidal output voltage in the normal and buffered mode are identified with the classification "VFI-SS-.." or "VI-SS-..". SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... - Page 21 4.5 m, and tandem grounded connector 15 A, min. 250 V. Connecting Steps for connecting the device to mains Connect the IEC connector ①. Connecting the power cord to the power socket SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
- Page 22 Fasten the power plug interlock ② to the power supply module WARNING If the power plug is secured with a clamp, the power outlet must be freely accessible to allow the device to be easily removed from the mains. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
- Page 23 You cancel the warning signal by pressing button ④. Operate on/off button ② of power supply (The LED on the power supply ③ will be lit green) SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
- Page 24 Connecting 5.2 Connecting the device to power SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 25: Commissioning
Risk of damage to the device! Make sufficient allowances for the device to acquire room temperature before you put it into use. If condensation develops, wait at least 12 hours before switching on the device. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 26: Initial Commissioning - Initial Startup
When working with Windows, always switch off the PC by clicking Start > Shut Down. Press the on/off button behind the front panel door. The green power LED is switched off. Disconnect the mains connector to isolate the device from mains. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 27: Reinstalling The Software
All existing data, programs, user settings, authorizations and license keys on the drives will be deleted and are thereby lost. For information on the functions, refer to the README.TXT file on the Restore DVD. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... - Page 28 Commissioning 6.3 Reinstalling the software SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 29: Dimension Drawings
Dimension drawings Dimensional drawing of the device Figure 7-1 Dimension drawing of the device SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 30: Dimensional Drawing For The Use Of Telescopic Rails
Dimension drawings 7.2 Dimensional drawing for the use of telescopic rails Dimensional drawing for the use of telescopic rails Figure 7-2 Dimension drawing for the use of telescopic rails SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 31: Appendix
The installation guidelines and safety instructions specified in this documentation must be observed for commissioning and operation. Connecting peripherals Noise immunity requirements to EN 61000-6-2 are met if connected peripherals are suitable for industrial applications. Peripheral devices may only be connected via shielded cables. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 32: Certificates And Approvals
A.2 Certificates and Approvals Certificates and Approvals DIN ISO 9001 certificate The Siemens quality management system for all production processes (development, production and sales) meets DIN ISO 9001:2000 requirements. This has been certified by DQS (the German society for the certification of quality management systems). - Page 33 This Class A digital apparatus complies with Canadian ICES-003. Avis Canadian Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. AUSTRALIA This product meets the requirements of the AS/NZS CISPR 22 Standard. SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...
-
Page 34: Service And Support
Industry Automation and Drive Technologies - Homepage (http://www.siemens.com/automation/service&support) After-sales information system for SIMATIC PC / PG Information about contacts, drivers, and BIOS updates, FAQs and Customer Support can be found at: After-sales information system for SIMATIC PC/PG (http://www.siemens.com/asis) SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... -
Page 35: Index
Restart, 26 Identification data, 14 Serial number, 14 Initial commissioning, 26 Shipping, 13 Status displays, 11, 12 Supply voltage, 21 Keyboard, 9 Telescopic rails, 18 Microsoft Windows Product Key, 14 Monitoring Status displays, 11, 12 SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01... - Page 36 SIMATIC Industrial PC SIMATIC IPC547C Getting Started, 06/2009, A5E02411398-01...