Philips DFR9000/01 Instructions For Use Manual page 12

12 ENGLISH
1
2
3
4
5
6 3
7
1 2
4
8
9
0
!
@
#
$
%
^
5
SYSTEM MENU
Opens and close the system menu.
6 3, 4, 1 and 2
– Navigates in up (3), down (4), left (1) and right (2) direction in the system menu.
– Selects next (4, 2) or previous (3, 1) preset station in Tuner and DAB mode.
7
OK
– Confirms actions in the menu.
£
– Selects secondary audio services in DAB mode.
8 ∞ §
Search previous/next frequency in TUNER mode.
Select previous/next broadcasting frequency in DAB mode.
™ 9 9 (STOP) / B (PLAY) / ; (PAUSE)
In system menu mode, the 9 (STOP) closes the menu without storing any settings.
¡
The other functions are not supported by your DFR9000.
10
– VOL +
Adjusts the volume up (+) and down (–).
11
c MUTE
Mutes speaker and headphones output.
12
BASS / SUBTITLE
Enables the – VOL + button to adjust the low frequency response.
)
13
TREBLE /
Enables the – VOL + button to adjust the high frequency response.
(
*
14
REPEAT / REPEAT (A-B) / SHUFFLE /SCAN
These buttons have no function.
&
15
LOUDNESS /
Switches loudness on and off.
16
RECORD /
This button has no function.
17
SURROUND /
Selects the various available surround modes. What surround modes are available is
dependent on the number of speakers connected and the type of input signal
(stereo or multichannel).
18
REAR / AUDIO
Enables the – VOL + button to adjust the volume of the surround rear speaker.
19
SUB / ZOOM
Enables the – VOL + button to adjust the volume of the subwoofer.
20
– TV CH +
Selects TV channels up (+) and down (–).
21
DISC MENU
These buttons have no function.
22
DISPLAY
In tuner mode:Toggles between RDS name and frequency on left display.
In DAB mode:Toggles between station name, programme type, ensemble, signal strength
In other (A/V) modes:Toggles between surround mode information, video input
23
DIM
Decreases/increases display brightness.
ANGLE
MONITOR
FTS
SOUND MODE
information on left and middle display.
information, audio input information and type of incoming signal
(video- and audio stream information).
Information is shown on left and middle display.