Table of Contents
Advertisement
Section 2 - In Case of Difficulty
PROBLEM
Pickup not receiving
reflection from
shaft./Readjust probe-to-
shaft gap and angle as
Constant low output
required
from optical Keyphasor
Reflective tape wrong
transducer.
size or coated with
oil./Replace tape.
Pickup defective./See
Section 2.1.
Pickup receiving steady
reflection from output
Constant high voltage
from optical shiny shaft./
output from optical
Adjust probe-to-shaft
Keyphasor transducer.
gap and angle as
required.
If you require further assistance, contact
customer support using the contact
information at the front of this manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CAUSE/SOLUTION
11
Advertisement
Table of Contents
