HP 12500 Series Installation Manual page 30

Item
ESD-preventive wrist strap
NOTE:
The number of screws and nuts supplied with the switch depends on those shipped from the factory.
User-supplied tools and equipment
• Mechanical lift
Phillips screwdriver P1 – 100 mm, P2 – 150 mm, and P3 – 250 mm
•
• Flat screwdriver P4 – 75 mm
Marker
•
Tape
•
Diagonal pliers, wire-stripping pliers, and wire clippers
•
Socket wrench
•
• Cables such as network cables and fiber cables
Meters and equipment, such as hub and multimeter
•
Configuration terminal, such as PC
•
NOTE:
The rack accessories and installation tools are not included in this section. The accessories and installation
tools may vary depending on the rack model. For more information, see the installation guide of the
corresponding rack.
Quantity
2
24
Purpose
ESD-prevention