Huawei SUN2000 Series Quick Manual page 19

7
SUN2000 App
1. The SUN2000 app is a mobile phone app that communicates with the solar inverter
over a WLAN module, a Bluetooth module, or a USB data cable. As a convenient
local monitoring and maintenance platform, it allows for querying alarms,
configuring parameters, and performing routine maintenance. The app is named
SUN2000.
2. Go to Huawei app store (https://appstore.huawei.com), search for SUN2000, and
download the app installation package. You can also scan the QR code
(https://solar.huawei.com/~/media/Solar/APP/SUN2000.apk) to download the
installation package.
3. Connect the WLAN module, Bluetooth module, or USB data cable to the USB port
on the solar inverter to ensure that the solar inverter can communicate with the
SUN2000 app.
WLAN Connection or
Bluetooth Connection
Login Page
Function Menu
Android
Select Connection Mode
•
The screenshots in this document correspond to app version 3.2.00.002
(this app is available only on Android phones currently).
•
When the WLAN connection is used, the initial name of the WLAN hotspot
is Adapter-WLAN module SN, and the initial password is Changeme.
•
The initial password to log in to the app for Common User, Advanced
User, and Special User is 00000a.
•
Use the initial password upon first power-on and change it immediately
after login. To ensure account security, change the password periodically
and keep the new password in mind. Not changing the initial password
may cause password disclosure. A password left unchanged for a long
period of time may be stolen or cracked. If a password is lost, devices
cannot be accessed. In these cases, the user is liable for any loss caused
to the PV plant.
•
Set the correct grid code based on the application area and scenario of the
solar inverter.
USB Data Cable
Connection
Select User
18
Scan the QR
code to
download the
app (Android).
Android
Quick Settings