Connecting To Headphones; Viewing Pictures From Connected Video Equipment - Toshiba SD-P2000 Owner's Manual

Connections

Connecting to Headphones

You can listen to movies and music privately by
connecting headphones.
To (headphone) jack
(not supplied)

Viewing Pictures From Connected Video Equipment

You can use the LCD of this player to monitor pictures of video equipment connected via the AV IN jack.
Press the AV SOURCE button, then switch player mode and external AV input mode. In the external AV input
mode, the driver of this player is stopped, and screen saver function/auto power OFF function becomes ineffective.
AV IN AV OUT
To AV IN
70
VOLUME
0
COMPONENT S VIDEO
VIDEO
BITSTREAM/PCM
Audio/video cable
Caution
When you use headphones, keep the volume at a
moderate level. If you use the headphones continuously
with high volume sound, it may cause hearing damage.
Connecting headphones
Connect headphones to the headphone jack using
a stereo mini plug.
Before connecting, temporarily turn down the
volume with the headphone volume control.
Readjust to your preference when playback starts.
• Turn off the player before you connect or
disconnect the headphone cable. Neglecting this
may cause abnormal performance of the player.
• You can connect up to 2 headphones.
BATTERY DC IN 12V
To audio output (red)
To audio output (white)
To video output (yellow)
Signal flow
Video equipment