Hitachi DH 14DL Handling Instructions Manual page 44

English
Lighting time
○
AAAA manganese batteries: approx. 15 hrs.
AAAA alkali batteries: approx. 30 hrs.
CAUTION
Do not look directly into the light.
Such actions could result in eye injury.
(4) Replacing the batteries
(a) Loosen the hook screw with a phillips-
head screwdriver (No. 1). (Fig. 14)
Remove the hook cover by pushing in
the direction of the arrow. (Fig. 15)
(b) Remove the old batteries and insert
the new batteries. Align with the hook
indications and position the plus (+)
and minus (–) terminals correctly.
(Fig. 16)
(c) Align the indentation in the hook
main body with the protuberance
of the hook cover, press the hook
cover in the direction opposite to
that of the arrow shown in Fig. 15
and then tighten the screw.
Use commercially available AAAA
batteries (1.5 V).
NOTE
Do not tighten the screw excessively. Such action could strip the screw threads.
CAUTION
Failure to observe the following can result in battery leakage, rust or malfunction.
○
Position the plus (+) and minus (–) terminals correctly.
Replace both batteries at the same time. Do not mix old and new batteries.
Remove exhausted batteries from the hook immediately.
Do not discard batteries together with normal trash and do not throw batteries into
○
fi re.
Store batteries out of the reach of children.
○
Use batteries correctly in accordance with the battery specifi cations and
○
indications.
2. Switch operation
When the switch trigger is depressed, the tool rotates. When the switch trigger is released,
○
the tool stops.
Hook
Screw
Indentation
AAAA
batteries
Indentation
44
Phillips-head
screwdriver
Fig. 14
Arrow
Fig. 15
Hook
Protuberance
Protuberance
Hook cover
Fig. 16