Page 4
Rechargeable battery Latch Push Handle Pull out Insert Pilot lamp Hole for connecting the rechargeable battery Drill bit Part of SDS-plus shank Front cap Grip Dust cup Dust collector (B) Push button Forward rotation Reverse rotation Push the side Push the side indication indication...
Page 9
3.4 mm 90 mm 45 mm 3.5 mm 4.0 mm 110 mm 50 mm 110 mm 50 mm 5.0 mm 160 mm 100 mm 5.5 mm 110 mm 50 mm 6.5 mm 160 mm 100 mm 7.0 mm 160 mm 100 mm 8.0 mm 160 mm...
d) Remove any adjusting key or wrench before GENERAL SAFETY RULES turning the power tool on. A wrench or a key left attached to a rotating part WARNING! of the power tool may result in personal injury. Read all instructions. e) Do not overreach.
14. Do not insert object into the air ventilation slots c) Use power tools only with specifically designated of the charger. battery packs. Inserting metal objects or inflammables into the Use of any other battery packs may create a risk charger air ventilation slots will result in electrical of injury and fire.
2. If liquid leaks onto your skin or clothes, wash well CAUTION with clean water such as tap water immediately. 1. If liquid leaking from the battery gets into your eyes, There is a possibility that this can cause skin irritation. do not rub your eyes and wash them well with fresh 3.
OPTIONAL ACCESSORIES (sold separately) 1. Battery (BCL1430, EB14B, EBM1830, EB1820L) EBM1830 It may be convenient to prepare some extra batteries. 2. Tool and adapter Tool Adapters Drilling holes in concrete or tile Adapter for slender shaft Drill bit (Slender shaft) (SDS-plus shank) Drilling holes in concrete or tile Use on jobs facing upwards...
Drilling holes in concrete or tile BATTERY REMOVAL/INSTALLATION 1. Battery removal Drill bit (slender shaft) Hold the handle tightly and push the battery latches Outer dia. Overall length Effective length (2 pcs.) to remove the battery (see Figs. 1 and 2). 3.4 mm CAUTION: 90 mm...
Table 1 Indications of the lamps Lights for 0.5 seconds. Does not light for Before Blinks 0.5 seconds. (off for 0.5 seconds) (RED) charging While Lights Lights continuously charging (RED) Lights for 0.5 seconds. Does not light for Blinks Charging 0.5 seconds.
2. Confirm that the battery is mounted correctly. Table 3 3. Installation of dust cup or dust collector (B) (Optional Possible continuous accessories) (Fig. 6, Fig. 7) drilling number (holes) Bit dia. Depth When using a rotary hammer for upward drilling (mm) (mm) DH14DL DH18DL DH14DMR DH18DMR operations attach a dust cup or a dust collector (B)
Page 22
NOTE: (3) Pushing the rotary hammer forcibly is not necessary Pay attention to the spring orientation. Install the at all. Pushing slightly so that drill dust comes out spring with larger diameter away from you. (Fig. gradually is just sufficient. CAUTION: (3) Using as an auxiliary light When the drill bit touches construction iron bar, the...
Due to HITACHI’s continuing program of research and slide freely within the brush holders. development, the specifications herein are subject to NOTE: change without prior notice. When replacing the carbon brush with a new one, be sure to use the Hitachi Carbon Brush Code No. 328481.
Page 28
Hitachi Koki Co., Ltd. Code No. C99161421 G Printed in China...