Making A Call; Internal Call; External Call - Toshiba DKT2304-CT User Manual

Handset Operation

Making a Call

Making a Call
If you are talking on a call and you have reached the range limit, move back in
Note
range within 35 seconds or the call is dropped. This guide assumes that F1 is an
extension key (PDN) and F2 is an outside line key.

Internal Call

1. Pick up the handset and press
on the LCD.
If the connection is made between the handset and base,
you will see the current volume setting (shown right) for
approx. two seconds. The
If the connection is not made or the handset is at the
range limit of the DKT2204-CT/DKT2304-CT, the
message "
2. When you hear a dial tone, enter the number you are calling. The numbers display
on the LCD.
3. When you finish the call, press the
puts it in Auto Standby.

External Call

1. Press
If the connection is made between the handset and base, you will see the current
volume setting for approx. two seconds. The
2. When you hear a dial tone, enter the number you
are calling. The numbers display on the LCD
(shown right).
3. When you finish the call, press the
this hangs up the telephone and puts it in Auto
Standby.
30
NO SERVICE
F2
. The handset starts to establish a connection with the base unit.
Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones
F1
. The message
F1
LED turns on.
" displays.
Talk
button, this hangs up the telephone and
F2
Talk
button,
"ACQUIRING LINK
LED turns on.
" displays