4
Raise the fusing unit release lever, close the front cover and then close the side cover by
pressing the round projections near the side cover open button. The misfeed (
will go out and the start (
When closing the covers, be sure to close the front cover securely and then close the side
cover. If the covers are closed in the wrong order, the covers may be damaged.
DEVELOPER REQUIRED
When the developer replacement required (
DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN AUTORIZED TOSHIBA SERVICE
TECHNICIAN. Contact your service centre as soon as possible.
MAINTENANCE REQUIRED
When maintenance (
required. Contact your service centre as soon as possible.
) indicator will light up.
) indicator lights up, the developer should be replaced.
) indicator lights up, service by an authorised TOSHIBA service technician is
) indicator
6-7