Table of Contents
Advertisement
4 Operation
Operation
4
4.1
Setting time
4.1.1
Parameter assignment mode at LOGO! Display
Via the LOGO! display or the LOGO! TDE, you can activate the parameterization
mode of the function blocks and set the parameters, e.g. switching on and off time.
A detailed description of the parameterization mode of the LOGO! can be found in
the LOGO! Manual in chapter 8.1 "Selecting parameter assignment mode":
https://support.industry.siemens.com/cs/ww/en/view/100761780/67026258187
Note
Only experienced LOGO! users should parameterize the weekly and yearly timer
in the parameterization mode. It includes advanced settings that may alter the
function of the timer.
4.1.2
Settings via the message text
As operator, you can set the times of the time switch function via the message
texts.
The message texts
can view and change the parameters in the message texts via the LOGO! TDE
display, or, alternatively, via the web server.
Figure 4-1: Message texts
Switch on and off time control
Standard Time
Day: M-W-F—
On:
07:30 Off: 14:00
Day: -T-T-S-
On:
07:30 Off: 21:00
Light: ON
Suppress switch-on at certain times
Easter break
04.10-04.24
Winter break
12.20-01.07
Summer break
08.01-09.10
LOGO! TDE
The following table shows, how to set a time in the LOGO! TDE message text,
using the example of standard time.
If you have not connected LOGO! TDE, you can also make the settings via the
integrated web server of the LOGO!.
Time Switch Function
Entry ID: 109745699,
V1.0,
(Figure
4-1) contain the most essential parameters for this. You
1/3
Event Timer
Day:
On:
Off:
Date: 08.15-8.20
3/3
04/2017
2/3
MTWTFSS
07:30
14:00
28
Hide quick links:
Advertisement
Table of Contents
