Yearly Timer Parameterization - Siemens LOGO! 8 Manual

3 Commissioning
3.2.2

Yearly timer parameterization

The table below shows how to parameterize a yearly timer in LOGO! Soft Comfort.
Table 3-2: Yearly timer parameterization
No.
1.
2.
3.
4.
Time Switch Function
Entry ID: 109745699, V1.0,
Start LOGO! Soft Comfort V8.1 and open the supplied LOGO! program
"109745699_LOGO8_TimeSwitch_CODE_en.lsc".
Double-click to open the block properties of a yearly timer for which you would
like to parameterize the date.
1. Select a repeat pattern for the yearly timer.
2. Enter the repeat range for the yearly repetition.
3. Set the switching on and off date, e.g. the duration of the summer holidays.
Note:
As a general rule, always make sure that the block names are clearly designated.
This simplifies the parameterization of the blocks in the LOGO! parameterization
mode (see 4.1.1).
3
Confirm the new parameters with "OK".
04/2017
Action
1
2
23