Table of Contents
Advertisement
1-7. Matching Connectors and Cables
Use the following connectors, cables or equivalents when connecting cables to the unit.
Panel indication
Connector name
NETWORK-1
RJ-45 modular jack
NETWORK-2
RS-232C
D-sub 9-pin, Male
USB
USB Type A
MAINTENANCE
DVI-I
DVI-I 29-pin, Female
(when the BKCU-VD1
is installed)
*1 : Conforms to the IEEE 802.3 Ethernet 10BASE-T/100BASE-TX/1000BASE-T standards.
*2 : The following crimp contact is required for the socket.
AWG#24 to #26 : 1-563-814-11
*3 : DVI 24-pin male-DVI 24-pin male cable
*4 : DVI 29-pin male-D-sub mini 15-pin male cable
*5 : DVI 29-pin male-The combination of D-sub mini 15-pin female conversion adapter and the analog RGB cable can also be used.
1-8 (E)
Matching connector and cable
Name
*1
_
D-sub 9-pin, Female
Connector 9-pin, Female
Junction Shell 9-pin
USB cable
Digital connection : DVI cable (for digital single-link)
Analog connection :DVI cable (for analog connection)
Sony part No.
_
1-563-815-21
*2
1-563-375-11
_
A ferrite core is attached
A ferrite core is attached
*3
*4 *5
BCU-100 IM
Advertisement
Table of Contents
