Table 1-2. Recommended Test Equipment - HP 10811A Operating & Service Manual

INSTRUMENT
1. Frequency Analyzer*
2. Frequency Counter**
3. Computing Controller** HP-IB compatible
4. Frequency Reference
5. Sampling Voltmeter
6. General Purpose
Oscilloscope
7. Frequency Doubler
8. Mixer Amplifier**
9. Spectrum Analyzer
10. Power Supply
11. DC Voltmeter
12. Torque Screwdriver
13. Feedthru Termination
14. BNC to Miniature
Coax Adapter
15. Test Connector
*Not needed if items 2, 3, 4 are available.
**Not needed if HP 5390A Frequency Stability Analyzer is available.
***If a 105A/B is used, its performance must be verified.

Table 1-2. Recommended Test Equipment

REQUIRED CHARACTERISTICS
Phase noise measurement at 10 MHz 5390 5390A*
cannot measure 10811 specs above 10 Hz
10 MHz range, HP-IB programmable, 2 ns
resolution
Short term stability ≤5x10
Long term stability <5x10
±3% accuracy at 10 MHz
Bandwidth ≥ 10 MHz
Operates at 10 MHz
10 MHz Mixer/50 dB gain
10 MHz/70 dB range
480 mA @ 20V (2 required)
Any HP type digital or analog
2-30 inch-lb. (0.2 to 3.4 newton meters)
50 ohms
Use for 10811B Only
For testing 1 0811A
MODEL NO.
5345A**
9835A or 9825A **
-12
/second 5065A, 5061A
-10
/day (Option 004),
or 105A/B***
3406A
1740A
10515A
K79-59992A**
8552B/8553B
6215A
8730-0012
11046B
05060-6116
See para. 8-61
Model 10811A/B
5