Maintenance; Recommended Maintenance Schedule(S) - Toro Groundsmaster 7210 Series Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
Note:
Looking for an Electrical Schematic or
Hydraulic Schematic for your machine? Download a
free copy of the schematic by visiting www.Toro.com

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 250 hours
Every 400 hours
Every 800 hours
Every 1,500 hours
Every 6,000 hours
Every 2 years
Important:
Refer to your Engine Operator's Manual for additional maintenance procedures. A detailed
Service Manual is also available for purchase from your Authorized Toro Distributor.
Maintenance Procedure
• Torque the frame-mounting bolts.
• Torque the wheel lug nuts.
• Change the mower-deck gearbox lubricant.
• Change the hydraulic fluid and filter.
• Test the safety-interlock system.
• Check the engine-oil level.
• Check the engine coolant level.
• Clean the radiator with compressed air (more often in dirty and dusty conditions).
• Check the hydraulic fluid level.
• Clean the mower deck.
• Grease the bearing and bushing grease fittings (more often in dirty or dusty
conditions and after every washing).
• Check battery cable connections.
• Check the tire pressure.
• Check the alternator-belt tension.
• Check the lubricant in the mower-deck gearbox.
• Inspect the cooling-system hoses and seals. Replace them if cracked or torn.
• Torque the wheel lug nuts.
• Change the engine oil and filter.
• Change the mower-deck gearbox lubricant.
• Service the air cleaner (more often in dusty or sandy conditions).
• Replace the engine fuel filter.
• Replace the fuel-filter canister for the water separator.
• Drain water or other contaminants from the water separator.
• Check the fuel lines and connections.
• Change the hydraulic fluid and filter.
• Inspect the engine-valve clearance. Refer to your engine owner's manual.
• Replace moving hoses.
• Disassemble, clean, and assemble the soot filter of the DPF. or clean the soot
filter if engine faults
SPN
in the InfoCenter.
• Drain and clean the fuel tank.
• Flush and replace the cooling-system fluid.
and searching for your machine from the Manuals link
on the home page.
3720 16, 3720
FMI SPN FMI
41
0, or 3720 16 display
SPN FMI