Table of Contents
Advertisement
1-7-2. Rack Mounting the MKS-8075A
(Extension Adaptor)/MKS-8076
(Memory Card/USB Adaptor)
The MKS-8075A and MKS-8076 can be mounted in a 19-
inch standard rack.
To mount them in a rack, use the recommended rack
mount parts and follow the procedure described below.
n
In order to rack mount the MKS-8075A and MKS-8076,
the following conditions must be met.
. Two or more adaptors must be configured to the two
rows as shown in the illustration by connecting them
horizontally together.
. Number of adaptors connected must be either 2, 4, 6 or 8.
. The connection method C (flat) must be used.
. For the connection method, refer to "2-4. Connecting the
MKS-8075A/MKS-8076".
Tools required
. Screws (B5 x 8)
. Washers for M5 (Sony part No.: 7-688-005-11)
When 2 adaptors are connected : Each 4 pcs
When 4 adaptors are connected : Each 8 pcs
When 6 adaptors are connected : Each 12 pcs
When 8 adaptors are connected : Each 16 pcs
1. Precautions for rack mounting
w
. To prevent the rack from falling or moving, fix the rack
on a flat and steady floor using bolts or other fixings.
If the rack falls due to the weight of the equipment, it
may cause death or injury.
. Be sure to use the side panels of the adaptor itself for
rack mounting.
If not, injury may result and the equipment may fall due
to insufficient strength.
. After rack mounting, be sure to tighten the screws on the
side panels and fix the unit in the rack.
c
When mounting the unit in the rack, note the following:
. Be sure to mount in the rack with two persons or more.
. Mount in the rack in a stable position.
CCP-8000 IM
2. Rack mounting procedure
1. Remove the panel covers (L) and (R).
2. Install the adaptor into the rack using screws (B5 x 8)
and washers.
n
The required number of screws are different with the
numbers of adaptors connected.
3. Install the panel covers (L) and (R).
Rack
B5 x 8
Washer
Panel cover (L)
Panel cover (R)
When 8 adaptors are connected
Adaptor
Washer
B5 x 8
1-17
Hide quick links:
Advertisement
Table of Contents
